AI Skill Report Card

Designing 3D Parallel Weave Patterns

A-86·Nov 22, 2026·Source: Extension-page
15 / 15

Given a target animal (e.g., "a small fox"), produce:

  1. A body-part breakdown (head, body, legs, tail, ears)
  2. A bead count table per section with increase/decrease rows
  3. A color map (which beads get which color, by row/round)
  4. Assembly order and attachment points

Example output snippet:

SECTION: Head (round, parallel peyote tube)
Round 1: 6 beads (cast on) - color: tan
Round 2: 6 beads (no increase) - color: tan
Round 3: 12 beads (increase every bead) - color: tan
Round 4: 12 beads - color: tan (2 black beads at eye positions: #4, #9)
Round 5: 12 beads - color: tan
Round 6: 6 beads (decrease every other bead) - color: tan
→ Close with decrease to 3, pull tight, tie off.
Recommendation▾
Add a brief note on handling reference-image conversion (color extraction, pose mapping) since it's mentioned in the description but not detailed in workflow
14 / 15

Progress:

  • Step 1: Decompose the animal into primitive shapes (sphere=head, cylinder=body/legs, cone=snout/tail, flat triangle=ears)
  • Step 2: Assign a bead circumference (bead count) to each primitive based on relative size — smallest viable round is 4 beads, scale up proportionally
  • Step 3: Map each primitive to a construction technique (see Techniques below)
  • Step 4: Write round-by-round bead counts with explicit increase/decrease placement (never increase/decrease on adjacent beads in the same round — stagger for roundness)
  • Step 5: Overlay color per round/bead based on the reference image or markings (stripes, eye spots, belly color change)
  • Step 6: Define seams — where parts attach (e.g., "attach ear at round 4, beads 3-5 of head")
  • Step 7: Output a materials list (bead counts by color, wire/thread length estimate)
  • Step 8: Validate proportions against reference (leg length vs body length, head-to-body ratio)

Techniques (default toolkit)

  • Tubular parallel peyote: default for legs, body, snout, tail — even bead count, two-bead-per-step ladder start
  • Increase rounds: double bead count by stitching two beads into one gap; stagger across 3+ positions
  • Decrease rounds: skip beads / pull two gaps together to shrink; used for rounding off heads, tail tips, nose taper
  • Flat peyote panel: for ears, fins, wings — worked flat then folded/attached
  • Fringe/loop: for tails with fur texture, whiskers
Recommendation▾
Include an edge case for asymmetrical animals or unusual poses beyond 'sitting'
19 / 20

Example 1: Input: "Make a pattern for a small owl, brown and white, sitting pose" Output:

MATERIALS: ~450 size 11 seed beads (320 brown, 90 white, 40 black for eyes/beak)

BODY (tubular peyote, egg-shaped)
R1: 6 (brown) cast on
R2: 6 (brown)
R3: 12 (brown) - increase at beads 1,3,5
R4: 18 (brown) - increase at beads 2,6,10
R5-R9: 18 (brown), at R7 add white belly patch beads 9-13
R10: 12 (brown) - decrease at beads 1,4,7,10
R11: 6 (brown) - decrease every other
Close tail end.

HEAD (sphere, attaches to R2 of body top)
R1-R4: as body R1-R4 but stop at 12
R3: add 2 black beads (eyes) at positions 3,9
R4: add 1 black bead (beak) centered at position 6, pointed outward
R5: decrease to 6, close

WINGS (x2, flat peyote panel)
Row 1: 4 brown
Row 2: 6 brown (increase both edges)
Row 3-6: 6 brown, taper last 2 rows to point
Attach along body R5-R8, both sides.

FEET (x2, short tube)
R1-R3: 4 brown, straight tube, flatten and tack to base of body.

Example 2: Input: "Turtle, green shell with yellow pattern" Output:

SHELL (flat circular peyote, worked in the round, domed via increases)
R1: 6 (green)
R2: 12 (green) increase every bead
R3: 18 (green) increase every 3rd bead, add yellow beads at positions 2,8,14 (hexagon pattern start)
R4: 24 (green/yellow alternating per hex pattern)
R5: 24 (green) - no further increase, dome begins to curve inward naturally from tension
R6: 18 (green) decrease, edge border

BODY/HEAD/LEGS/TAIL: tubular peyote, 8-bead circumference, olive green, taper head and tail with 2-bead decreases at tips.

Attach shell over body at 4 points (front, back, both sides) using connecting thread bridges.
Recommendation▾
Consider a troubleshooting section for when bead counts don't close evenly (odd-count mismatches)
  • Always stagger increases/decreases across the round — clustering them creates flat spots or puckers instead of smooth curves
  • Keep bead counts even for standard two-drop tubular peyote starts; use odd counts only with a documented step-up adjustment
  • Scale bead counts in multiples of 2 for tubes, multiples of 6 for domed/rounded sections (hex-based rounding)
  • Define color changes at round boundaries when possible — mid-round color changes should be called out explicitly with bead index
  • Give a visual proportion check: head circumference ≈ 60-80% of body circumference for most stylized animals
  • Always include a materials list with total bead counts per color for shopping/prep
  • Don't increase/decrease on consecutive beads in the same round — causes visible seams/ridges
  • Don't forget the "step-up" at the end of each round in tubular peyote — rounds aren't true circles without it
  • Don't specify colors only by name without row/bead index — ambiguous for construction
  • Don't make legs/neck tubes too thin (below 4-bead circumference) — they become structurally floppy
  • Don't skip the attachment/assembly section — a pile of separate parts isn't a finished pattern
0
Grade A-AI Skill Framework
Scorecard
Criteria Breakdown
Quick Start
15/15
Workflow
14/15
Examples
19/20
Completeness
19/20
Format
15/15
Conciseness
14/15